2 x 1.2m Dowel (might get away with 1, will confirm once I finalise plans)
Drill and Drill Piece to match your dowel diameter
Tape Measure
Mitre or Hand Saw
Sand Paper or Sander
A splash of paint- water-based varnish or paint colour of choice
How To
First up- measure the area you are working with.
Cut timber to size and sand
Next up measure your dowel lengths. Make sure they are high enough for the trays or boards to not topple over
Measure approx. 4 to 5cm in on both sides and mark with a ruler.
Measure approx. 4 to 6cm all the way down your line and mark with a cross. This is where the dowel will go. This will vary depending on your items that will be stored in this vertical holde
Apply Selleys Aquadhere Interior to both the holes in the base and dowel and place the dowel into the base. Wipe away any excess with a damp cloth
Allow to dry for minimum 12 hours to achieve maximum strength. This could be longer in cold, damp conditions
Selleys Original Sugar Soap is a professional strength and high performance formula which powers through tough grease and grime. Its also recommended for cleaning surfaces prior to painting and wallpapering.
Selleys Sugar Soap Wipes has the trusted cleaning performance of Selleys Original Sugar Soap in a quick and easy-to-use format that is ideal for removing marks and stains from painted walls and surfaces around your home.
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this article with your friends