Make sure both surfaces are clean, dry and dust-free. All traces of grease, rust, paint, etc. should be removed.
Carefully cut the sealed tips off the end of both syringe nozzles.
Dispense both parts (resin and hardener) equally onto a clean, disposable surface such as cardboard and mix them together with a nail or stick. You have 2 to 3 minutes to use the mixed glue.
Apply the glue mix to both surfaces and press together.
You don’t need to clamp, but don’t strain the bond for at least 30 minutes. It will gain maximum strength in 16 hours.
Scrape off excess adhesive and wipe mixing utensils with a tissue dipped in acetone or nail polish remover and replace the cap from plunger on nozzle.
Handy Tips
Clean up any uncured Araldite with acetone or nail polish remover.
Selleys Araldite 90 Seconds epoxy adhesive is a 90 second setting, two part epoxy adhesive which enables a durable bond to a variety of surfaces without lengthy clamp times.
Selleys Araldite Super Strength epoxy adhesive is a super strong two part epoxy that has excellent adhesion to a broad range of surfaces and can hold up to 150kg*, making it ideal for sticking heavy loads.
Selleys Araldite Ultra Clear epoxy adhesive is a crystal clear adhesive which leaves an invisible bond line. It has excellent bond strength to a wide range of surfaces.
Share
Share this article with your friends