How To Replace Old Silicone

Beginner Intermediate Advanced

1 hour

What You Need

Selleys No Mould
Selleys Silicone Remover
Selleys Rapid Mould Killer
Caulking gun
Silicone remover tool/blade
Methylated spirits
Cloth
Spatula

How To

Safely use a Silicone removing blade to scrape away as much of the old silicone as possible (TIP: Don't forget to wear safety gloves)!
Apply Selleys Silicone Remover evenly on the surface of the old silicone applying it about 5mm high
Leave Selleys Silicone Remover for at least 2 hours, then use a scraper to remove all the softened silicone from the surface
Clean the surface with methylated spirits
Spray the area with Selleys Rapid Mould Killer to eradicate any residual mould & mildew
Rinse the area with water and allow to dry completely
Apply Selleys No Mould (read instructions on back of pack), ensuring sealant is pushed into the joint
Tool sealant with a spatula dipped in detergent water within 5-10 minutes of application
Clean up any residual excess silicone with turps before product skins

Handy Tips

Selleys No Mould will be shower ready in 1 hour after application.
Be careful not to touch semi cured sealant until fully cured (at least 48 hours)
To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth

Products

Selleys Silicone Remover

Selleys Silicone Remover takes the elbow grease out of removing old and unwanted silicone.

Selleys No Mould Silicone Sealant

Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary

Selleys Rapid Mould Killer 750ml

Selleys Rapid Mould Killer is a fast acting mould killer. Its powerful formula destroys mould and eliminates 99.9% of germs. Selleys Rapid Mould Killer will leave tiles and grout sparkling clean with minimal effort.