Utility knife – a small, sharp blade makes cleaning edges safe and easy
Rounded spatula
A clean rag
Mineral turpentine
Easy as..
Clean your workspace so that it’s free from dust and debris. If necessary, cut away or remove any existing silicone. Contaminants will prevent a decent bond, so wipe over the area with some mineral turps.
Hold the sealant tip at a 45 degree angle and apply the silicone evenly and with a steady hand. When you reach the end of the area you want to seal, release the lever to stop the flow of silicone.
Use a damp finger or rounded spatula to wipe off any excess product to ensure a smooth, clean finish. Allow the silicone to cure before exposing to water (approximately 72 hours).
Clean up any excess and tools with mineral turps before the product cures.
Handy Tips
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
Keep sealant cleaned regularly to avoid the build-up of soap scum.
Getting a proper seal around your sink prevents water penetration. Here’s the best way to ensure a complete seal around your sink area to make it easier to clean and less prone to water damage and discolouration. And all without the need for a caulking
Kitchen and bathroom renovations can be costly, not to mention time consuming – but an outdated kitchen or bathroom can also be an absolute eye sore and hindrance if you are looking to sell!
Best ways to remove to silicone. Follow our step by step process. Selleys will show you the easiest and most effective way to remove silicone sealant from tiles, metal, glass, and all those tricky places around the home.
Share
Share this article with your friends