Selleys Plasti-Bond Heavy Duty

Selleys Plasti-Bond Heavy Duty is a multi-purpose plastic putty that can be used for building or repair work where filling, bonding or moulding is necessary. It sets in 20 minutes without shrinkage, after the hardener is mixed in.

Features

Excellent adhesion to a variety of surfaces
Sets hard in 20 minutes without shrinking or cracking
Can be used inside and outside the home
Can be sawn, drilled, tapped, sanded and painted
Can be coloured with cement oxides or paint tinters (before adding hardener)

Product Details
How to Use
Handy tips
Clean Up
Videos

Where can this product be used?

Filling holes, cracks and splits in a variety of surfaces
Repairing galvanised iron guttering and downpipes
Repairing walls, ceilings, floors, tiles, doors, locks, etc.
Fixing bolts and other fixtures into concrete.
Repairs to furniture, sporting equipment, cars, caravans and boats (above the water line).
Stopping countersunk heads of fastenings in any material.
Repairing chips in concrete steps
Weight support and high impact areas on doors and windows (i.e. replacing hinges and door locks)

What materials is this product suitable for?

Metal
Timber
Brick
Fibre cement
Fibreglass
Concrete
Plaster
Alloys
Tiles
Ceramics
Many plastics

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size	150g Tube 400g Can 800g Can 1.6kg Can
Colours	Olive green/grey
Technology	Polyester Resin Based
Use	Interior
	Exterior

Surface to be repaired should be clean, dry, unpainted and free from grease or oil.
Dents in steel and aluminium body work can be punched or drilled to give a positive key for Selleys Plasti-Bond if it is to be subjected to excessive vibration.
Stir Plasti-Bond Heavy Duty before use.
Add 2.5cm length of hardener to every 20ml (heaped tablespoon) of Plasti-Bond Heavy Duty. Mix in hardener by working the product from side to side until colour has blended and uniform colour is achieved. If faster setting time is required, or in cold weather, add more hardener.
Apply with a putty knife slightly overfilling to allow for sanding. Where several separate fillings have to be made, use less hardener and take your time. Feather edges for a perfect finish. It is easier to smooth off most of the excess with a Surform or Dreadnought file before it becomes rock hard (between 20 and 30 minutes). Ordinary files or sandpaper may be used once rock hard (after about 30 minutes).
Paint with water or oil-based paints.
Clean tools with mineral turps before product cures. Replace lid after use and store in a cool place.

Limitations:

Will not adhere to polyethylene, polypropylene or Teflon

For casting applications, use light oil or silicone car polish on the mould before casting.

Uncured product may be removed with mineral turps.
Cured product can be removed by sanding and scraping.

Related Products

Selleys Fireproof Cement

Selleys Fire-resistant cement for interior filling of stoves and fireplaces. Fireproof cement is a thick white paste.

Selleys No More Cracks Doors & Trims

Selleys No More Cracks Doors & Trims ready to use filler can be used inside or outside with gloss paints and applications such as doors, windows, architraves, trims and skirting boards.

Selleys No More Cracks Exterior Brick & Render

Selleys No More Cracks Exterior Brick & Render is ready to use filler that dries with a durable render finish. It easily repairs deep wide cracks, chips, holes and small surface imperfections on exterior masonry surfaces.